Perfil (CV) del personal docente investigador

Santolaria Mazo, Jorge
Departamento: Departamento de Ingeniería de Diseño y Fabricación
Área: Ingeniería de los Procesos de Fabricación
Centro: Escuela de Ingeniería y Arquitectura

Research Institute: INSTITUTO DE INVESTIGACIÓN EN INGENIERÍA DE ARAGÓN (I3A)
Grupo: T56_23R: GIFMA. Grupo de ingeniería de fabricación y metrología avanzada
Categoría profesional: Cated. Universidad

Descargar currículum en formato PDF

 
         

Artículos

  • Javier Brosed, F.; José Aguilar, J.; Acero, R.; Santolaria, J.; Aguado, S.; Pueo, M. Calibration and uncertainty budget analysis of a high precision telescopic instrument for simultaneous laser multilateration. MEASUREMENT. 2022. DOI: 10.1016/j.measurement.2022.110735

  • Ho, Phuong Thao; Albajez, José Antonio; Santolaria, Jorge; Yagüe-Fabra, José A. Study of Augmented Reality based manufacturing for further integration of quality control 4.0: a systematic literature review. APPLIED SCIENCES (SWITZERLAND). 2022. DOI: 10.3390/app12041961

  • Aguado, S.; Pérez, P.; Albajez, J.A.; Velázquez, J.; Santolaria, J. Inaccuracy of machine tools due to verification conditions. MEASUREMENT. 2022. DOI: 10.1016/j.measurement.2021.110629

  • Acero R.; Aguilar J.J.; Brosed F.J.; Santolaria J.; Aguado S.; Pueo M. Design of a multi-point kinematic coupling for a high precision telescopic simultaneous measurement system. SENSORS. 2021. DOI: 10.3390/s21196365

  • Velázquez J.; Conte J.; Majarena A.C.; Santolaria J. Study on lt accuracy improvement by calibration based on network measurements. SENSORS. 2021. DOI: 10.3390/s21227479

  • Ho, P.T.; Albajez, J.A.; Yagüe, J.A.; Santolaria, J. Preliminary study of Augmented Reality based manufacturing for further integration of Quality Control 4.0 supported by metrology. IOP CONFERENCE SERIES. MATERIALS SCIENCE AND ENGINEERING. 2021. DOI: 10.1088/1757-899X/1193/1/012105

  • Pueo, M.; Acero, R.; Lope, M.A.; Santolaria, J. Uncertainty budget analysis for worm and worm gear single-flank rolling tests. MEASUREMENT. 2020. DOI: 10.1016/j.measurement.2019.107051

  • Pueo, Marcos; Santolaria, Jorge; Acero, Raquel; Sierra-Pérez, Jorge. Design methodology for production systems retrofit in SMEs. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH. 2020. DOI: 10.1080/00207543.2019.1651460

  • Aguado, Sergio; Pérez, Pablo; Albajez, José Antonio; Santolaria, Jorge; Velázquez, Jesús. Configuration optimisation of laser tracker location on verification process. MATERIALS. 2020. DOI: 10.3390/ma13020331

  • Aguilar, Juan José; Acero, Raquel; Brosed, Francisco Javier; Santolaria, Jprge. Development of a high precision telescopic instrument based on simultaneous laser multilateration for machine tool volumetric verification. SENSORS. 2020. DOI: 10.3390/s20133798

  • Korner, M.E.H.; Lambán, M.P.; Albajez, J.A.; Santolaria, J.; Corrales, L.C.N.; Royo, J. Systematic literature review: Integration of additive manufacturing and industry 4.0. METALS (BASEL). 2020. DOI: 10.3390/met10081061

  • Pueo, Marcos; Acero, Raquel; Gracia, Ángel; Santolaria, Jorge. Measuring sensors calibration in worm gear rolling testers. SENSORS. 2020. DOI: 10.3390/s20113148

  • Pueo, M.; Acero, R.; Santolaria, J. Characterization and parameters sensitivity analysis of worm gear rolling measurement. MEASUREMENT. 2020. DOI: 10.1016/j.measurement.2020.108220

  • Aguado, Sergio; Pérez, Pablo; Albajez, A. José; Santolaria, Jorge; Velazquez, Jesús. Study on Machine Tool Positioning Uncertainty Due to Volumetric Verification. SENSORS. 2019. DOI: 10.3390/s19132847

  • Pueo, M.; Acero, R.; Lope, M.A.; Santolaria, J. Measurement uncertainty evaluation model in radial composite gear inspection. PRECISION ENGINEERING. 2019. DOI: 10.1016/j.precisioneng.2019.07.015

  • Tiscareño, Julieta; Albajez García, José Antonio; Santolaria Mazo, Jorge. Analysis of different camera calibration methods on a camera-projector measuring system. PROCEDIA MANUFACTURING. 2019. DOI: 10.1016/j.promfg.2019.09.041

  • Brau-Avila, A.; Acero, R.; Santolaria, J.; Valenzuela-Galvan, M.; Icasio-Hernandez, Octavio. Kinematic parameter identification procedure of an articulated arm coordinate measuring machine based on a metrology platform. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 2019. DOI: 10.1007/s00170-019-03878-w

  • Brosed Dueso, Francisco Javier; Acero Cacho, Raquel; Aguado Jiménez, Sergio; Herrer Torres, Marta; Aguilar Martín, Juan José; Santolaria Mazo, Jorge. Design and development of a calibration artefact for length measurement system. PROCEDIA ENGINEERING. 2019. DOI: 10.1016/j.promfg.2019.07.029

  • Pérez, P.; Aguado, S.; Albajez, J.A.; Santolaria, J. Influence of laser tracker noise on the uncertainty of machine tool volumetric verification using the Monte Carlo method. MEASUREMENT. 2019. DOI: 10.1016/j.measurement.2018.10.012

  • Brosed, Francisco Javier; Acero Cacho, Raquel; Aguado, Sergio; Herrer, Marta; Aguilar, Juan José; Santolaria Mazo, Jorge. Development and validation of a calibration gauge for length measurement systems. MATERIALS. 2019. DOI: 10.3390/ma12233960

  • Aguado, Sergio; Pérez, Pablo; Albajez, José Antonio; Santolaria, Jorge; Velázquez, Jesús. Algorithm to optimize measurement system location in a machine tool verification. PROCEDIA MANUFACTURING. 2019. DOI: 10.1016/j.promfg.2019.10.042

  • Perez, P.; Syam, W.P.; Albajez, J.A.; Santolaria, J.; Leach, R. Lateral error compensation for stitching-free measurement with focus variation microscopy. MEASUREMENT SCIENCE & TECHNOLOGY. 2019. DOI: 10.1088/1361-6501/ab046e

  • del Amo, C.; Olivares, V.; Cóndor, M.; Blanco, A.; Santolaria, J.; Asín, J.; Borau, C.; García-Aznar, J.M. Matrix architecture plays a pivotal role in 3D osteoblast migration: The effect of interstitial fluid flow. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS. 2018. DOI: 10.1016/j.jmbbm.2018.04.007

  • Majarena, A.C.; Aguilar, J.J.; Santolaria, J. Development of an error compensation case study for 3D printers. PROCEDIA MANUFACTURING. 2017. DOI: 10.1016/j.promfg.2017.09.145

  • Pérez Muñoz, Pablo; Aguado Jiménez, Sergio; Albajez García, José Antonio; Velázquez Sancho, Jesús; Santolaria Mazo, Jorge; Aguilar Martín, Juan José. Analysis of the measurement capacity of a machine tool. PROCEDIA MANUFACTURING. 2017. DOI: 10.1016/j.promfg.2017.09.041

  • Tiscareño, Julieta; Santolaria, Jorge; Albajez García, José Antonio. Measurement procedure for application of white light scanner in the automotive sector. PROCEDIA MANUFACTURING. 2017. DOI: 10.1016/j.promfg.2017.09.094

  • Aguado Jiménez, Sergio; Pérez Muñoz, Pablo; Albajez García, José Antonio; Velázquez Sancho, Jesús; Santolaria Mazo, Jorge. Monte Carlo method to machine tool uncertainty evaluation. PROCEDIA MANUFACTURING. 2017. DOI: 10.1016/j.promfg.2017.09.105

  • Pueo, M.; Santolaria, J.; Acero, R.; Gracia, A. A review of tangential composite and radial composite gear inspection. PRECISION ENGINEERING. 2017. DOI: 10.1016/j.precisioneng.2017.05.007

  • Cajal, C.; Santolaria, J.; Acero, R.; Pueo, M. Design concerns in dimensional verification and benchmarking proposal. INTERNATIONAL JOURNAL OF MECHATRONICS AND MANUFACTURING SYSTEMS. 2017. DOI: 10.1504/IJMMS.2017.084794

  • Brau Ávila, Agustín; Santolaria Mazo, Jorge; Acero Cacho, Raquel; Valenzuela-Galvan, Margarita; Herrera-Jiménez, Victor; Aguilar Martín, Juan José. Mathematical calibration procedure of a capacitive sensor-based indexed metrology platform. MEASUREMENT SCIENCE & TECHNOLOGY. 2017. DOI: 10.1088/1361-6501/aa5740

  • Ayuso, Jose María; Monge, Rosa; Martinez-Gonzalez, Alicia; Virumbrales-Munoz, Maria; Llamazares, Guillermo A.; Berganzo, Javier; Hernandez-Lain, Aurelio; Santolaria, Jorge; Doblare, Manuel; Hubert, Christopher; Rich, Jeremy N.; Sanchez-Gomez, Pilar; Perez-Garcia, Victor M.; Ochoa, Ignacio ; Fernandez, Luis J. Glioblastoma on a microfluidic chip: Generating pseudopalisades and enhancing aggressiveness through blood vessel obstruction events. NEURO-ONCOLOGY. 2017. DOI: 10.1093/neuonc/now230

  • Acero, R.; Brau, A.; Santolaria, J.; Pueo, M. Evaluation of a metrology platform for an articulated arm coordinate measuring machine verification under the ASME B89.4.22-2004 and VDI 2617_9-2009 standards. JOURNAL OF MANUFACTURING SYSTEMS. 2017. DOI: 10.1016/j.jmsy.2016.11.002

  • Pueo, M.; Santolaria, J.; Acero, R.; Aguado, S.; Gracia, A. A new calibration guideline for worm and worm-gear rolling testers. PROCEDIA MANUFACTURING. 2017. DOI: 10.1016/j.promfg.2017.09.119

  • Acero, R.; Santolaria, J.; Pueo, M.; Abad, J. Uncertainty estimation of an indexed metrology platform for the verification of portable coordinate measuring instruments. MEASUREMENT. 2016. DOI: 10.1016/j.measurement.2015.12.024

  • Acero, R.; Santolaria, J.; Brau, A.; Pueo, M. Virtual distances methodology as verification technique for AACMMs with a capacitive sensor based indexed metrology platform. SENSORS. 2016. DOI: 10.3390/s16111940

  • Aguado, Sergio; Santolaria, Jorge; Samper, David; Aguilar, Juan José. Forecasting method in multilateration accuracy based on laser tracker measurement. MEASUREMENT SCIENCE & TECHNOLOGY. 2016. DOI: 10.1088/1361-6501/aa5073

  • Aguado, S.; Santolaria, J.; Samper, D.; Velázquez, J.; Javierre, C.; Fernández, Á. Adequacy of technical and commercial alternatives applied to machine tool verification using laser tracker. APPLIED SCIENCES (BUCURESTI). 2016. DOI: 10.3390/app6040100

  • Pérez Muñoz, Pablo; Albajez García, José Antonio; Santolaria Mazo, Jorge. Analysis of the initial thermal stabilization and air turbulences effects on Laser Tracker measurements. JOURNAL OF MANUFACTURING SYSTEMS. 2016. DOI: 10.1016/j.jmsy.2016.10.002

  • Conte, J.; Santolaria, J.; Majarena, A.C.; Acero, R. Modelling, kinematic parameter identification and sensitivity analysis of a Laser Tracker having the beam source in the rotating head. MEASUREMENT. 2016. DOI: 10.1016/j.measurement.2016.03.059

  • Aguado, S.; Santolaria, J.; Samper, D.; Velazquez, J.; Aguilar, J. J. Empirical analysis of the efficient use of geometric error identification in a machine tool by tracking measurement techniques. MEASUREMENT SCIENCE & TECHNOLOGY. 2016. DOI: 10.1088/0957-0233/27/3/035002

  • Dieste, J.A.; Fernández-Cuello, A.; Javierre, C.; Santolaria, J. Conformal polishing approach: Tool footprint analysis. ADVANCES IN MECHANICAL ENGINEERING. 2016. DOI: 10.1177/1687814016630518

  • Aguado, Sergio; Santolaria, Jorge; Samper, David; Aguilar, Juan J.; Velázquez, Jesús. Improving a real milling machine accuracy through an indirect measurement of its geometric errors. JOURNAL OF MANUFACTURING SYSTEMS. 2016. DOI: 10.1016/j.jmsy.2016.05.006

  • Cajal, C.; Santolaria, J.; Samper, D.; Velazquez, J. Efficient volumetric error compensation technique for additive manufacturing machines. RAPID PROTOTYPING JOURNAL. 2016. DOI: 10.1108/RPJ-05-2014-0061

  • Clavería, I.; Elduque, D.; Santolaria, J.; Pina, C.; Javierre, C.; Fernandez, A. The influence of environmental conditions on the dimensional stability of components injected with PA6 and PA66. POLYMER TESTING. 2016. DOI: 10.1016/j.polymertesting.2015.12.008

  • Aguado Jiménez, Sergio; Velazquez Sancho, Jesús; Samper Carnicer, David; Santolaria Mazo, Jorge. Modelling of computered-assisted nachine tool volumetric verificacion process. INTERNATIONAL JOURNAL OF SIMULATION MODELLING. 2016. DOI: 10.2507/IJSIMM15(3)9.353

  • Acero, R.; Brau, A.; Santolaria, J.; Pueo, M. Verification of an articulated arm coordinate measuring machine using a laser tracker as reference equipment and an indexed metrology platform. MEASUREMENT. 2015. DOI: 10.1016/j.measurement.2015.03.023

  • Conte, J.; Majarena, A. C.; Acero, R.; Santolaria, J.; Aguilar, J. J. Performance evaluation of laser tracker kinematic models and parameter identification. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 2015. DOI: 10.1007/s00170-014-6551-7

  • Acero, R.; Santolaria, J.; Pueo, M.; Brau, A. Verification of a laser tracker with an indexed metrology platform. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 2015. DOI: 10.1007/s00170-015-7648-3

  • Conte, J.; Majarena, A. C.; Aguado, S.; Acero, R.; Santolaria, J. Calibration strategies of laser trackers based on network measurements. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 2015. DOI: 10.1007/s00170-015-7661-6

  • Cajal Hernando, Carlos Enrique; Garrido Rubio, Ana Pilar; Samper Carnicer, David; Santolaria Mazo, Jorge. Simulation of Laser Triangulation Sensors Scanning for Design and Evaluation Purposes. INTERNATIONAL JOURNAL OF SIMULATION MODELLING. 2015. DOI: 10.2507/IJSIMM14(2)6.296

  • Acero, R.; Santolaria, J.; Pueo, M.; Aguilar, J. J.; Brau, A. Application of virtual distances methodology to laser tracker verification with an indexed metrology platform. MEASUREMENT SCIENCE & TECHNOLOGY. 2015. DOI: 10.1088/0957-0233/26/11/115010

  • Elduque, A.; Elduque, D.; Javierre, C.; Fernández, Á.; Santolaria, J. Environmental impact analysis of the injection molding process: Analysis of the processing of high-density polyethylene parts. JOURNAL OF CLEANER PRODUCTION. 2015. DOI: 10.1016/j.jclepro.2015.07.119

  • Javierre, Carlos; Clavería, Isabel; Santolaria Mazo, Jorge; Elduque, Daniel. Methodology for Clamping Load Measurement of Locking Systems Based On White Light Digitalization. MEASUREMENT. 2015. DOI: 10.1016/j.measurement.2015.05.042

  • Conte Blasco, Javier; Santolaria Mazo, Jorge; Majarena Bello, Ana Cristina; Aguado Jiménez, Sergio. Laser tracker kinematic error model formulation and subsequent verification under real working conditions. PROCEDIA ENGINEERING. 2015. DOI: 10.1016/j.proeng.2015.12.561

  • Fernández, Ángel; Dieste, José Antonio; Javierre, Carlos; Santolaria Mazo, Jorge. Surface Roughness Evolution Model for Finishing Using an Abrasive Tool on a Robot. INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS. 2015. DOI: 10.5772/61251

  • Ayuso, José María; Monge, Rosa; Martinez-González, Alicia; Llamazares, Guillermo A.; Berganzo, Javier; Hernández-Laín, Aurelio; Santolaria, Jorge; Doblaré, Manuel; Sánchez-Gómez, Pilar; Pérez-García, Victor M.; Ochoa, Ignacio; Fernandez, Luis J. An in vitro model for glioblastoma using microfluidics: Generating pseudopalisades on a chip. CANCER RESEARCH. 2015. DOI: 10.1158/1538-7445.BRAIN15-B04

  • Aguado, S.; Santolaria, J.; Aguilar, J.; Samper, D.; Velazquez, J. Improving the Accuracy of a Machine Tool with Three Linear Axes using a Laser Tracker as Measurement System. PROCEDIA ENGINEERING. 2015. DOI: 10.1016/j.proeng.2015.12.557

  • Brosed Dueso, Francisco Javier; Aguilar Martín, Juan José; Santolaria Mazo, Jorge; Lázaro Carrascal, Raúl. Geometrical verification based on a laser triangulation system in industrial environment. Effect of the image noise in the measurement results. PROCEDIA ENGINEERING. 2015. DOI: 10.1016/j.proeng.2015.12.558

  • Lope Domingo, Miguel Angel; Albajez García, José Antonio; Santolaria Mazo, Jorge. General procedure to evaluate the progress and results of the student: teaching and learning the skills of Manufacturing Engineering. KEY ENGINEERING MATERIALS. 2014. DOI: 10.4028/www.scientific.net/KEM.615.189

  • Dieste, José Antonio; Fernández, Angel; Javierre, Carlos; Santolaria Mazo, Jorge. Environmentally Conscious Polishing System Based on Robotics and Artificial Vision. ADVANCES IN MECHANICAL ENGINEERING. 2014. DOI: 10.1155/2014/798907

  • Santolaria, Jorge; Conte, Javier; Pueo, Marcos; Javierre, Carlos. Rotation error modeling and identification for Robot kinematic calibration by circle point method. METROLOGY AND MEASUREMENT SYSTEMS. 2014. DOI: 10.2478/mms-2014-0009

  • Santolaria, J.; Majarena, A. C.; Samper, D.; Brau, A.; Velázquez, J. Articulated arm coordinate measuring machine calibration by laser tracker multilateration. THE SCIENTIFIC WORLD JOURNAL. 2014. DOI: 10.1155/2014/681853

  • Majarena, A. C.; Santolaria, J.; Samper, D.; Aguilar, J. J. Teaching mechanism calibration to engineering students. KEY ENGINEERING MATERIALS. 2014. DOI: 10.4028/www.scientific.net/KEM.615.171

  • Aguado, Sergio; Santolaria, Jorge; Samper, David; Aguilar, Juan José. Study of self-calibration and multilateration in machine tool volumetric verification for laser tracker error reduction. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE. 2014. DOI: 10.1177/0954405413511074

  • Pueo Arteta, M.; Santolaria Mazo, J.; Acero Cacho, R.; Faci, A. T. Comparison of double flank roll testers for worm and worm gear. KEY ENGINEERING MATERIALS. 2014. DOI: 10.4028/www.scientific.net/KEM.615.39

  • Brau, A.; Valenzuela, M.; Santolaria, J.; Aguilar, J. J. Evaluation of different probing systems used in articulated arm coordinate measuring machines. METROLOGY AND MEASUREMENT SYSTEMS. 2014. DOI: 10.2478/mms-2014-0020

  • Cacho, R. A.; Santolaria Mazo, J.; Arteta, M. P. Double flank roll testing as verification technique for micro gears. KEY ENGINEERING MATERIALS. 2014. DOI: 10.4028/www.scientific.net/KEM.615.45

  • Cajal, C.; Santolaria, J.; Velazquez, J. Parametric modeling and compensation of layer manufacturing machines. MATERIALS SCIENCE FORUM. 2014. DOI: 10.4028/www.scientific.net/MSF.797.145

  • Majarena-Bello,A.; Brosed-Dueso,F.; Suelves-Albert,A.; Santolaria-Mazo,J. Programación de una célula robotizada para soldadura de complementos a depósitos de acero a presión. DYNA (BILBAO). 2014. DOI: 10.6036/7154

  • Aguado,S.; Santolaria,J.; Samper,D.; Aguilar,J. J. Protocol for machine tool volumetric verification using commercial laser tracker. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 2014. DOI: 10.1007/s00170-014-6055-5

  • Brau Avila,A.; Santolaria Mazo,J.; Valenzuela Galván,M.; Aguilar Martín,J. J. Mechanical design of an indexed metrology platform for verification of portable coordinate measuring machines. INTERNATIONAL JOURNAL OF MECHATRONICS AND MANUFACTURING SYSTEMS. 2014. DOI: 10.1504/IJMMS.2014.064751

  • Elduque, Daniel; Clavería, Isabel; Fernández, Ángel; Javierre, Carlos; Pina, Carmelo; Santolaria, Jorge. Analysis of the Influence of Microcellular Injection Molding on the Environmental Impact of an Industrial Component. ADVANCES IN MECHANICAL ENGINEERING. 2014. DOI: 10.1155/2014/793269

  • Elduque, Daniel; Clavería, Isabel; Fernández, Angel; Javierre, Carlos; Pina, Carmelo; Santolaria, Jorge. Methodology to analyze the influence of microcellular injection molding on mechanical properties. POLYMERS & POLYMER COMPOSITES. 2014

  • Aguado Jiménez, Sergio;Samper Carnicer, David;Santolaria Mazo, Jorge; Aguilar Martin, Juan José. A stratey for geometric error characterization in multi-axis machine tool by use of a laser tracker. KEY ENGINEERING MATERIALS. 2014. DOI: 10.4028/www.scientific.net/KEM.615.22

  • Royo, Ana C; Aguilar, Juan José; Santolaria Mazo, Jorge. Development of a New Calibration Procedure and Its Experimental Validation Applied to a Human Motion Capture System. JOURNAL OF BIOMECHANICAL ENGINEERING-TRANSACTIONS OF THE ASME. 2014. DOI: 10.1115/1.4028523

  • Conte, J.; Santolaria, J.; Majarena, A. C.; Brau, A.; Aguilar, J. J. Laser Tracker error modeling and kinematic calibration strategy. KEY ENGINEERING MATERIALS. 2014. DOI: 10.4028/www.scientific.net/KEM.615.63

  • Aguado, Sergio; Samper, David; Santolaria Mazo, Jorge; Aguilar, Juan José. Volumetric Verification of Multiaxis Machine Tool Using Laser Tracker. THE SCIENTIFIC WORLD JOURNAL. 2014. DOI: 10.1155/2014/959510

  • Brau Avila, Agustín.; Santolaria Mazo, Jorge.; Aguilar Martín, Juan José. Design and mechanical evaluation of a capacitive sensor-based indexed platform for verification of Portable Coordinate Measuring Instruments. SENSORS. 2014. DOI: 10.3390/s140100606

  • Santolaria, Jorge; Monge, Rosa; Tobajas, Ángel; Jimenez, Roberto; Cabrera, Mirko A.; Fernandez, Luis J. . Design, manufacture and geometric verification of rapid prototyped microfluidic encapsulations by computed tomography. COMPUTERS IN INDUSTRY. 2013. DOI: 10.1016/j.compind.2013.06.015

  • Conte, Javier; Santolaria Mazo, Jorge; Majarena, Ana Cristina; Aguilar, Juan José. Identification and Kinematic Calculation of Laser Tracker Errors. PROCEDIA ENGINEERING. 2013. DOI: 10.1016/j.proeng.2013.08.190

  • Santolaria, Jorge; Conte, Javier; Ginés, Manuel. Laser tracker-based kinematic parameter calibration of industrial robots by improved CPA method and active retroreflector. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 2013. DOI: 10.1007/s00170-012-4484-6

  • Santolaria, J.; Brosed, F. J; Velázquez, J. ;Jiménez, R. Self-alignment of on-board measurement sensors for robot kinematic calibration. PRECISION ENGINEERING. 2013. DOI: 10.1016/j.precisioneng.2013.02.003

  • Samper,D.;Santolaria,J.;Brosed,F. J.;Majarena,A. C.;Aguilar,J. J. Analysis of Tsai calibration method using two- and three-dimensional calibration objects. MACHINE VISION AND APPLICATIONS. 2013. DOI: 10.1007/s00138-011-0398-9

  • Santolaria,J.;Gines,M. Uncertainty estimation in robot kinematic calibration. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING. 2013. DOI: 10.1016/j.rcim.2012.09.007

  • Acosta, D.; Velázquez, J.; Albajez, J.A; Yagüe, J.A.; Lope, M.A. Machine tool Verification According to Machine Configuration. PROCEDIA ENGINEERING. 2013. DOI: 10.1016/j.proeng.2013.08.262

  • Cajal, C.; Santolaria, J.; Velazquez, J.; Aguado, S.; Albajez, J.A. Volumetric error compensation technique for 3D printers. PROCEDIA ENGINEERING. 2013. DOI: 10.1016/j.proeng.2013.08.276

  • Lope Domingo, M.A. ; Albajez, J.A.; Santolaria, J. The Accreditation of Industrial Engineering in Spain: Teaching and Learning the Skills of Manufacturing Engineering. PROCEDIA ENGINEERING. 2013. DOI: 10.1016/j.proeng.2013.08.174

  • Samper, D.; Santolaria, J.; Majarena, A. C.; Aguilar, J. J. Correction of the refraction phenomenon in photogrammetric measurement systems. METROLOGY AND MEASUREMENT SYSTEMS. 2013. DOI: 10.2478/mms-2013-0051

  • Majarena-Bello, A.; Santolaria-Mazo, J.; Samper-Carnicer, D.; Aguilar-Martín, J. J. Análisis y mejoras en el diseño de un mecanismo cinemático de alta precisión. DYNA (BILBAO). 2013

  • Santolaria Mazo, Jorge; Jimenez Pacheco, Roberto; Rada, M.; Loscos, F. Error compensation method for improving the accuracy of biomodels obtained from CBCT data. MEDICAL ENGINEERING & PHYSICS. 2013. DOI: 10.1016/j.medengphy.2013.08.012

  • Majarena, Ana Cristina; Santolaria, Jorge; Samper, David; Aguilar, Juan José;. Computational model for the control, performance evaluation, and calibration of a parallel mechanism. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 2013. DOI: 10.1007/s00170-013-5169-5

  • Samper,D.; Santolaria,J.; Brosed,F. J.; Aguilar,J. J. A stereo-vision system to automate the manufacture of a semitrailer chassis. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 2013. DOI: 10.1007/s00170-012-4649-3

  • Majarena, A.C.; Santolaria, J.; Samper, D.; Aguilar, J.J. Analysis and evaluation of objective functions in kinematic calibration of parallel mechanisms. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 2013. DOI: 10.1007/s00170-012-4363-1

  • Aguado, Sergio; Samper, David; Santolaria Mazo, Jorge; Aguilar, Juan José. Machine Tool Rotary Axis Compensation Trough Volumetric Verification Using Laser Tracker. PROCEDIA ENGINEERING. 2013. DOI: 10.1016/j.proeng.2013.08.189

  • Majarena, Ana Cristina; Santolaria Mazo, Jorge; Samper, David; Aguilar, Juan José. Education Software For The Modelling And Calibration Of Kinematic Mechanisms. PROCEDIA ENGINEERING. 2013. DOI: 10.1016/j.proeng.2013.08.281

  • Acero, Raquel; Santolaria Mazo, Jorge; Pueo, Marcos. Verification methods for micro gears. Analysis of double flank roll testing applied to micro gears. PROCEDIA ENGINEERING. 2013. DOI: 10.1016/j.proeng.2013.08.257

  • Pueo Arteta, M.; Santolaria Mazo, Jorge; Acero Cacho, R.; Aso Arjol, G. Double Flank Roll Testing Machines Intercomparison for Worm and Worm Gear. PROCEDIA ENGINEERING. 2013. DOI: 10.1016/j.proeng.2013.08.231

  • Aguado, S.; Santolaria, J.; Samper, D.; Aguilar, J. J. Influence of measurement noise and laser arrangement on measurement uncertainty of laser tracker multilateration in machine tool volumetric verification. PRECISION ENGINEERING. 2013. DOI: 10.1016/j.precisioneng.2013.03.006

  • Aguado,S.; Samper,D.; Santolaria, J.; Aguilar,J. J. Identification strategy of error parameter in volumetric error compensation of machine tool based on laser tracker measurements. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE. 2012. DOI: 10.1016/j.ijmachtools.2011.11.004

  • Majarena-Bello,A.; Santolaria-Mazo,J.; Samper-Carnicer,D.; Aguilar-Martín,J. J. Study of rotary angle flexible hinges in parallel mechanisms. DYNA (BILBAO). 2012. DOI: 10.6036/4431

  • Aguado,S.;Samper,D.;Santolaria,J.;Aguilar,J. J. Laser tracker based volumetric verification of machine tools. ADVANCED MATERIALS RESEARCH. 2012. DOI: 10.4028/www.scientific.net/AMR.498.151

  • Majarena Bello, A.C.; Santolaria Mazo, J.; Samper Carnicer, D.; Aguilar Martín, J.J. MODELADO E IDENTIFICACIÓN DE PARÁMETROS GEOMÉTRICOS DE LÁSER TRACKERS. ANALES DE INGENIERÍA MECÁNICA. 2012

  • Brosed,F. J.;Santolaria,J.;Aguilar,J. J.;Guillomía,D. Laser triangulation sensor and six axes anthropomorphic robot manipulator modelling for the measurement of complex geometry products. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING. 2012. DOI: 10.1016/j.rcim.2012.04.002

  • Majarena, A. C.;Santolaria, J.;Samper, D.;Aguilar, J. J. Kinematic calibration of a 2-DOF spatial parallel mechanism. AIP CONFERENCE PROCEEDINGS. 2012. DOI: 10.1063/1.4707570

  • Aguado,S.;Samper,D.;Santolaria,J.;Aguilar,J. J. Towards an effective identification strategy in volumetric error compensation of machine tools. MEASUREMENT SCIENCE & TECHNOLOGY. 2012. DOI: 10.1088/0957-0233/23/6/065003

  • Santolaria, J.;Aguilar, J. -.;Guillomía, D. ;Cajal, C. A crenellated-target-based calibration method for laser triangulation sensors integration in articulated measurement arms. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING. 2011. DOI: 10.1016/j.rcim.2010.07.008

  • Aguilar, J. J.;Santolaria, J.;Yagüe, J. A. ;Majarena, A. C. Calibration, non-geometric error modelling and correction methods for articulated Arm Coordinate Measuring Machines. INTERNATIONAL JOURNAL OF MECHATRONICS AND MANUFACTURING SYSTEMS. 2011

  • Majarena,A. C.; Santolaria,J.; Samper,D.; Aguilar,J. J. Modelling and calibration of parallel mechanisms using linear optical sensors and a coordinate measuring machine. MEASUREMENT SCIENCE & TECHNOLOGY. 2011. DOI: 10.1088/0957-0233/22/10/105101

  • Majarena, A. C.; Santolaria, J.; Samper, D. ; Aguilar Martin, J. J. Spatial resolution-based kinematic design of a parallel positioning platform. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 2011. DOI: 10.1007/s00170-010-2878-x

  • Majarena-Bello,A.;Santolaria-Mazo,J.;Samper-Carnicer,D.;Aguilar-Martín,J. J. Backlash, positioning repeatability and preload analysis of a parallel mechanism. DYNA (BILBAO). 2011

  • Brosed, F. J.;Aguilar, J. J.;Guillomía, D. ;Santolaria, J. 3D geometrical inspection of complex geometry parts using a novel laser triangulation sensor and a robot. SENSORS. 2011

  • Majarena, Ana C.;Santolaria, Jorge;Samper, David ;Aguilar, Juan J. An Overview of Kinematic and Calibration Models Using Internal/External Sensors or Constraints to Improve the Behavior of Spatial Parallel Mechanisms. SENSORS. 2010. DOI: 10.3390/s101110256

  • Samper, D.; Santolaria, J.; Majarena, A. C. ; Aguilar, J. J. Comprehensive simulation software for teaching camera calibration by a constructivist methodology. MEASUREMENT. 2010. DOI: 10.1016/j.measurement.2010.01.009

  • Santolaria, J.; Majarena, A.C.; Samper, D.; García, J.J.; Aguilar, J.J. COMPARACION DE ESTANDARES INTERNACIONALES DE VERIFICACION DE BRAZOS ARTICULADOS DE MEDICION POR COORDENADAS: ASME B89.4.22-2004 VS VDI 2617_9-2009. ANALES DE INGENIERÍA MECÁNICA. 2010

  • Santolaria, J.;Brau, A.;Velazquez, J. ;Aguilar, J. J. A self-centering active probing technique for kinematic parameter identification and verification of articulated arm coordinate measuring machines. MEASUREMENT SCIENCE & TECHNOLOGY. 2010

  • Majarena, A.C.; Santolaria, J.; Samper, D.; Aguilar, J.J. IDENTIFICACION DE PARAMETROS CINEMATICOS DE UNA PLATAFORMA PARALELA PAN-TILT BASADA EN CINEMATICA INVERSA Y DIRECTA CINEMATICA PARALELA. ANALES DE INGENIERÍA MECÁNICA. 2010

  • Samper, D.; Santolaria, J.; Pastor, J. J.; Aguilar, J. J. Teaching camera calibration by a constructivist methodology. IEEE TRANSACTIONS ON EDUCATION. 2010. DOI: 10.1109/TE.2009.2039574

  • Santolaria, J.;Yague,J.;Jimenez,R.;Aguilar,J. Calibration-Based Thermal Error Model for Articulated Arm Coordinate Measuring Machines. PRECISION ENGINEERING. 2009. DOI: 10.1016/j.precisioneng.2009.01.002

  • Yagüe, J. A.; Velázquez, J; Albajez, J. A.; Aguilar, J.J.; Lope, M.A.; Santolaria, J. Development and calibration of self-centring probes for assessing geometrical errors of machines. MEASUREMENT SCIENCE & TECHNOLOGY. 2009

  • Pastor Perez, Jorge Juan; Santolaria, J.; Samper, D.; Aguilar, J.J. Educational innovation proyect using metrovisionlab. IADAT JOURNAL OF ADVANCED TECHNOLOGY ON EDUCATION. 2009

  • Santolaria, J.;Pastor,J. J.;Brosed,F. J.;Aguilar,J. J. A One-Step Intrinsic and Extrinsic Calibration Method for Laser Line Scanner Operation in Coordinate Measuring Machines. MEASUREMENT SCIENCE & TECHNOLOGY. 2009

  • Majarena, A.C.; Santolaria, J; Aguilar, J.J.; Pastor, J.; Cajal, C. PANT-TILT PLATFORM DESIGN BASED ON PARALLEL KINEMATICS. AIP CONFERENCE PROCEEDINGS. 2009. DOI: 10.1063/1.3273629

  • Santolaria, J.; Guillomía, D.; Cajal, C.; Albajez, J. A.; Aguilar, J.J. Modelling and Calibration Technique of Laser Triangulation Sensors for Integration in Robot Arms and Articulated Arm Coordinate Measuring Machines. SENSORS. 2009

  • Brosed, F. J.;Guillomía,D.;Santolaria,J.;Albajez,J. A.;Aguilar,J. J. Desarrollo De Un Sistema De Visión De Doble Sonda De Triangulación Láser Por Barrido Para Inspección De Intercambiadores EGR. ANALES DE INGENIERÍA MECÁNICA. 2008

  • Santolaria, J.;Aguilar,J.;Yague,J.;Pastor,J. Kinematic Parameter Estimation Technique for Calibration and Repeatability Improvement of Articulated Arm Coordinate Measuring Machines. PRECISION ENGINEERING. 2008

  • Santolaria, J.;Aguilar,J. J.;Pastor,J. J.;Jiménez,R.;Cajal,C. Técnica De Identificación De Parámetros Cinemáticos Para Brazos Articulados De Medición Por Coordenadas a Partir De Información Multi-Postura Usando Un Palpador De Asiento Cinemático. ANALES DE INGENIERÍA MECÁNICA. 2008

  • Yague, J.A; Aguilar, J.J; Albajez, J.A; Santolaria, J. Characterisation of 1D opto-electronic sensors and their application to angular self-centring probes for machine-tool verification. MEASUREMENT. 2008

  • Murillo Esteban, María Benita. Caracterización de los alquitranes obtenidos en la gasificación de fangos de estaciones depuradoras de aguas residuales. KALIUM. 2006

  • Aguilar, J.J.;Santolaria, J.;Guillomia, D.;Pastor, J.;Cajal, C. Accuracy analysis of laser scanning probes used in coordinate measurement: Simulation and experiments. VDI-BERICHTE. 2004

Comunicaciones

  • Medel, F.J.; Povar, M.; Santolaria, J. Novel Heterodyne Fringe Projection Technique for Measuring Volumetric Wear in Acetabular UHMWPE Retrievals: A Pilot Study. ASTM SPECIAL TECHNICAL PUBLICATION. 2018. DOI: 10.1520/STP160620170120

  • Santolaria, J.;Ginés, M.;Vila, L.;Brau, A.;Aguilar, J. J. Uncertainty evaluation in robot calibration by Monte Carlo method. AIP CONFERENCE PROCEEDINGS. 2012. DOI: 10.1063/1.4707581

Capítulos

  • La investigación como elemento sinérgico e integrador entre materias. Cascarosa Salillas, María Esther ; Albajez García, J. A. ; Velázquez Sancho, J. ; Santolaria Mazo, J. I JORNADAS DE INNOVACIÓN DOCENTE 2015: REPENSAR LA UNIVERSIDAD 2017

  • La investigación como elemento sinérgico e integrador entre materias. Cascarosa Salillas, María Esther ; Albajez García, José Antonio ; Velázquez Sancho, Jesús ; Santolaria Mazo, Jorge. I JORNADAS DE INNOVACIÓN DOCENTE CAMPUS IBERUS Y IX JORNADAS DE INNOVACIÓN DOCENTE E INVESTIGACIÓN EDUCATIVA UZ. 2015

  • A New Methodology for Kinematic Parameter Identification in Laser Trackers. Majareno Bello, Ana cristina; Conte Blasco, Javier; Santolaria Mazo, Jorge; Acero Cacho, Raquel. KINEMATICS. 2001



© Universidad de Zaragoza | Versión 2.26.4
© Servicio de Informática y Comunicaciones de la Universidad de Zaragoza (Pedro Cerbuna 12, 50009 ZARAGOZA - ESPAÑA)